ALUPLAN AL E 40 KSK CLASSIC

Art.No. 55089

Product

Self-adhesive SBS-modified bitumen membrane with aluminium composite, composite reinforcement and anti-slip surface

The membrane is eqipped with an additional torch-on selvedge to torch the side laps (e.g. if the temperature is below the recommended minimum application temperature). This prevents the below layer from thermal damages by torching.

Show more chevron_right

Top side / Bottom side

Top side

Sand with, 8 cm selvedge (foil) on both sides

Bottom side

Self-adhesive (peel-off foil) with 6 cm selvedge (sand)

Intended use

  • Vapour control layer (also suitable as temporary single layer waterproofing) on structural trapezoidal sheets (with thermal adhesion of the overlap)

Application

Self-adhesive method with / without thermal activation

Side laps min. 8 cm, end laps min. 10 cm overlap

Temperature for application min. + 10 °C (Self-adhesive method)

Standard

EN 13970

Packaging

18 rolls of 10 m x 1m = 180 m² per pallet

Characteristics Testing method Unit Result
Length EN 1848-1 m 10,0
Width EN 1848-1 m 1,00
Straightness EN 1848-1 mm/10m < 20
Mass per unit area EN 1849-1 kg/m2 NPD
Thickness EN 1849-1 mm 3,8
Watertightness EN 1928 kPa 100
Reaction to fire test EN 13501-1 Klasse E
Shear resistance of joints EN 12317-1 N/50mm NPD
Tensile force long./trans. EN 12311-1 N/50mm 1200/1000 (±200/±200)
Elongation at single-end breaking force EN 12311-1 % 10/10 (±5/±5)
Resistance to impact EN 12691 mm NPD
Resistance to tearing (nail shank) long./trans. EN 12310-1 N 200/200 (±50/±50)
Flexibility at low temperatures EN 1109 °C -20
Flow resistance at elevated temperature EN 1110 °C 80
Watertightness transmission after artifical aging EN 1928 kPa 100
Water vapour transmission EN 1931 Sd > 1500 m
Water vapour transmission after artifical aging EN 1931 Sd > 1500 m

NPD = No performance determined